Triggers for re-evaluation:

(e.g. change in proposed scale, new precursor, etc.)

Increase in scale

Change in precursors/oxidizers/reducing agents/etc. beyond those listed below

Required PPE:

Standard PPE for working in the lab:

Safety glasses

Lab coat

Pants

Close toed shoes

Additional PPE:

[insert glove type]

…

Chemical Reaction:

Potential Side Reactions:

Experimental conditions:

(e.g. Schlenk use, tube furnace, heating temperature, syringe needed for transfer, etc.)

Clean-Up:

Reagents/Chemicals needed

Range/scale and concentrations of quantities planned

Hazards associated

(Read Safety Data Sheets)

Special handling

(e.g. treat residue with alcohol before disposal, etc.)

Variable Conditions (e.g. heat, stir time)

Allowable range (e.g. temperature)

Resources needed (WPC activity)

Adding analytical tools at a later date will NOT trigger re-evaluation!

☐ Working on 4th Floor (MF-0001) :  includes low level hazards such as stir plates, UV-Vis, centrifuges, fume hoods, etc.

☐ Fluorolog-3 (MF-0007) with lasers (MF-0006)

☐ Glove Box Use (MF-0012)

☐ ICP-OES (MF-0010)

☐ Lithium Metal Use (MF-0003)

☐ MOCVD (MF-0008)

☐ Pressure Reactors (MF-0015)

☐ Pyrophorics Work (MF-0002)

☐ Raman Microscopy (MF-0013)

☐ Robots – WANDA/HERMAN/NIRVANA (MF-0018)

☐ Rotary Evaporator (MF-0019)

☐ Schlenk Line Use (MF-0016)

☐ Strong Acids Handling (MF-0005)

☐TGA/DSC (MF-0021)

☐ Tube Furnace/CVD (MF-0011)

☐ XRD (MF-0004)

☐Other:

What could go wrong?

(e.g. overpressure, runaway reaction, flammable byproduct, oxygen in vacuum  trap, etc.)

How to prevent the problem?

Response if this problem occurs?